 |
New PA Line
2007
Alter the success earned at national and international events and exhibitions with the Full Range Array XLA V2 & V3 which results perfect to do big events.
Triple Onda Launches the new TOP.S series, completing the Triple Onda PA systems range for every type of venue.
|
DOWNLOAD:
USER GUIDE TOP S.SERIES
-------------------------------------------------------------
Two ways Full-Range Line Array active speaker system.
Line input (balanced):
2.2V @ 10kOhm
Mains:
230V +/- 10% with overvoltage protection at 255V
Frequency response:
70-18kHz (-10dB@1W, processed)
Nominal directivity:
Horizontal: symmetrical 90º
Vertical: defined by the array
Components:
Low: 8x6.5” Neodynium Woofers with 1.5’’ aluminium voice coil.
High: 4x1” Neodynium Pure titanium compression driver coupled to a planar waveguide with
1’’ ¾ voice coil).
Amplifier power:
Low: 1000W AES (class D)
High: 500W AES (class AB)
Sensitivity:
Low: (4V rms@1m): 105 dB SPL
High: (4V rms@1m): 111 dB SPL
System output:
135dB SPL in long term and flat array
Weight: 51.5 Kg
Enclosure (width – height – depth in mm): 517 – 733 - 538
|
|
The new TOP.S 86A is the most innovating product of this range.
This cabinet is a small compact Line array system with a similar size of a conventional 2 way cabinet with a 15” woofer and 1” tweeter, even with more efficiency, more pressure, same consume based on the line array philosophy and adjustable to the needs for small and middle events. Because of the small size of the cabinet increase the resonance frequency which makes the cabinet unable to generate high power low frequencies. To resolve this problem at venues were are more low frequency needed Triple Onda has designed the TOP.S 15 swA which is developed to be used with the TOP.S 86A to be a elegant small size Line Array system to do small and middle events like, Pubs, Theatres, Auditorium and Churches. The rigging of this system is designed to connect more TOP.S 86A together and to connect the TOP.S 15 swA at an easy way. Because of the design of the TOP.S 86A it’s possible to reach to the public at every type of venue, because maximum vertical angle of 45º.
The TOP.S 18 swA looks like a normal sub_woofer for professional performance, but with the possibility to be connected at an easy way to his twin brother the TOP.S 18 it turns out to a sub_woofer like a conventional sub with 2 18” woofers but with a higher efficiency. The easy way to connect the 2 o more sub_woofers, allows this system to do different configurations with only one type of cabinet, turns out to very good handling and transport conditions.
DOWNLOAD INFORMATION:
TOP.S Series
TOP.S 86 A - Rigging
|
The rest of the TOP Series is completed with 3 more models:
 |
 |
 |
TOP.S 26A |
TOP.S 12A |
TOP.S 15A |
The first one is a little cabinet with 2 6.5’’ woofers with a compression driver with a horn which is ideal to use the like a studio monitor, to cover restaurants, modern shops, or to cover corners in a pub or discoteque. Also, if you want to put some of them with its rigging,
you can design a little, but false, line array choosing the inclination between themselves, too.
The other two cabinets are a multiproposal speaker systems. They can be used like a monitor on stage, PA or to reinforce some corners of a pub.
All these three products are designed to sound with the same rules like the other products of Triple Onda.
So, all the TOP Series Products are build-in cabinets and processed.
With all these new products, with there advanced and innovating technology, Triple Onda gives an answer to all the type of venues were needed professional performance and high efficiency PA systems.
Also, Triple Onda launch in the Market a revolutionary Plug&Play system of amplification&processing forming a little module which uses rack measures that allows it to be connected in any box of the market. These modules are designed for equipments of 1, 2, 3 or 4 ways.
This solution gives a great versatility to the amplification&processing of any system of PA or monitoring of the market, specially withany new product of Triple Onda, because our systems already allow the connection of these modules.
|
| |
Specifications of the TOP.S Series Products
|
All of them are designated with the most high technology
using Class D & Class AB
TOP.S 26A
Two-way Full-Range Active Speaker System
Specifications: 2 x 6" Nd Woofer Kevlar voice coil and 1" exponential ND titanium diaphragm
Amplification: Low F: 200 W Class D + Hi F: 60 W Class AB
Max Pressure in SPL: 118 dB
Frequency range: 70 Hz -20K Hz
Net weight: 8,5 Kg.
TOP.S 12A
Two-way Full-Range Active Speaker System
Specifications: 12" Nd Woofer 2,5" voice coil and 1" Nd Driver 1"3/4 diaphragm
Amplification: Low F: 500 W Classes D + Hi F: 60 W Class AB
Max Pressure in SPL: 125 dB
Frequency range: 48 Hz -19K Hz
Net weight: 20,3 Kg.
TOP.S 15A
Two-way Full-Range Active Speaker System
Specifications: 15” Woofer, 3" voice coil and 1" Nd Driver 1"3/4 diaphragm
Amplification: Low F: 500 W Class D + Hi F: 60 W Class AB
Max Pressure in SPL: 127 dB
Frequency range: 46 Hz -19K Hz
Net weight: 23.8 Kg.
TOP.S 318A
Three-way Full-Range Active Speaker System
Specifications: 18" Nd Woofer 4" voice coil, 12" Nd Woofer 2,5" voice coil & 1" Nd Driver 1"3/4
diaphragm
Amplification: Low F: 1000 W Class D + Mid F: 500 W Class D + Hi F: 60 W Class AB
Max Pressure in SPL: 130 dB
Frequency range: 40 Hz - 19 KHz
Net Weight: 52 Kg.
TOP.S 15swA
Active Low frequency Sub woofer
Specifications: 15" Nd Woofer 4" voice coil
Amplification: 500 W Class D
Max Pressure in SPL: 127 dB
Frequency range: 35 Hz - 170 Hz
Net Weight: 37 Kg.
TOP.S 18swA
Active Low frequency Sub woofer
Specifications: 18" Nd Woofer 4" voice coil
Amplification: 1000 W Class D
Max Pressure in SPL: 131 dB
Frequency range: 30 Hz - 150 Hz
Net Weight: 48 Kg.
|
|
|